-
2024-07-13 14:30:06
In recent years, with the continuous application of various new technologies in cleaning technology, such as the rapid development of biotechnology, ultrasonic cleaning technology has been increasingly applied to enzymes and microorganisms.
-
2024-07-13 14:26:15
Remove the nozzle of the component cleaning machine, start the machine, and check if the water sprayed by the spray gun is normal. If the water is normal, install the nozzle again and check if the machine has pressure. If there is still no pressure, it indicates that the pressure regulating valve is damaged or the seal of the high-pressure pump is damaged.
-
2024-07-13 14:24:45
A parts cleaning machine is a machine that uses ultrasonic waves, organic solvents, and other methods to clean parts. The drying time may vary depending on the drying method chosen by the system, as there are essential differences between hot air circulation drying systems and vacuum drying systems.
-
2024-07-13 14:20:57
The ultrasonic automatic cleaning machine consists of an ultrasonic generator and an ultrasonic transducer. The ultrasonic transducer is a sandwich type transducer made of piezoelectric ceramic material, which undergoes mechanical vibration under the action of an alternating electric field.
-
2024-07-13 14:18:23
If the scale of the parts cleaning machine is severe, acidic cleaning agents should be used. When cleaning, be extremely careful to avoid damaging the equipment, which is a highly technical task.
-
2024-07-13 14:16:09
When ultrasonic waves form bubbles and suddenly burst, they can generate over 1000 atmospheric pressures. This continuous and intense instantaneous high pressure strongly impacts the surface of the object, causing the dirt on the surface and in the gaps to quickly peel off, thus achieving the goal of cleaning and purifying the surface of the object.
-
2024-07-13 14:10:31
The selection of water-based cleaning or solvent cleaning for industrial equipment cleaning machines is based on the material and process requirements of your parts. If the cleanliness requirements for general cleaning are not high, water-based cleaning is preferred.
-
2024-07-13 14:07:51
Ultrasonic automatic cleaning machine can achieve a comprehensive cleaning effect on objects, especially for deep holes and blind holes, without affecting the material and accuracy of any objects.
-
2024-07-13 14:05:50
The principle of ultrasonic automatic cleaning machine is mainly to convert the sound energy of the power ultrasonic frequency source into mechanical vibration through a transducer, and radiate the ultrasonic waves into the cleaning solution in the tank through the cleaning tank wall.
-
2024-07-13 13:57:46
If the timing is appropriate, the parts can be placed in a cleaning agent overnight, soaked in the residual temperature of the cleaning agent, and started ultrasonic cleaning the next day. Even the most difficult parts to clean can achieve good cleaning results.
Pусский
Français
Deutsch
日本語
