WXG-1200H Intelligent Parts Washer

Product Description

① High efficiency: Applying automation control with the PLC, the machine allows one man operation. With the cyclic process of loading - high-pressure washing - rinsing - air-drying - unloading, the machine has a capacity 6-7 times higher than conventional manual washing. Since the pressure during high-pressure washing reaches 0.7MPA, the cleanliness of parts after washing is greatly improved.

② Multiple functions: The housing of the machine is made of stainless steel which allows use of over 95% of washing agents sold on the market. The high-pressure wash nozzles allow omnidirectional washing; the rinsing part is installed with a featured nozzle so that the machine can meet the parts washing requirements of various industries and complete washing without dead corners.

③ Low energy consumption: The machine is equipped with a “water-oil filtration circulation system” so that the filtered wash liquid is transparent and contains no impurity or floatage. This can ensure that the liquid used for washing is always clean, and user only need to add liquid into the machine without changing all the liquid in the tank.

④ Environment-friendly type: The machine is equipped with a "water-oil-gas recovery system" so that the purity of air produced during work of the machine can reach above 95%, meeting the national requirements for environmental protection; the recovered liquid drops can also be reused in the wash tank, thus saving energy and guaranteeing operators’ physical and mental health.

⑤ Water-liquid separation system: This function can transfer the floating oil on the water surface to a small separate box and keep the liquid clean.

Product Features

The washer is mainly used for washing parts of various mechanical products. Parts will undergo high-temperature, high-pressure and high-speed centrifugal spin-drying and air-drying, and then return to the loading station. The machine features low labor intensity, high work efficiency and fast washing and drying, which can improve the productivity.

Parts will be placed in an enclosed environment inside the washer so that wash liquid will not easily splash onto the outside of the housing, thus reducing the consumption of wash liquid and effectively improving the utilization of wash liquid.

Controlled by transducer, the operating speed of the washer can be increased or decreased freely during work as required for parts washing, thus to effectively proceed with the operation process.

Washing Process

Loading ⇨ Auto feed ⇨ High-pressure washing ⇨ Rinsing ⇨ Air-drying ⇨ Pneumatic door openin ⇨ Auto exit ⇨ Fully automatic completion

Technical Parameters

Model: WXG-1200H

Power supply: AC 380V 50HZ (Three-phase four-wire system)

Dimensions (L*W*H): 2850*1560*2600mm

Size of part table: Φ1000*400mm

Total power: 37KW

Power consumption: 18KW/h

Control mode: PLC LCD

Remark: The dimensions of the washer can be set according to the requirements for parts washing (1M cube - 3M cube)

Application Areas

We supply metal or plastic products to such industries as motorcycle parts, motors & pumps, general-purpose engines, sewing machines, and automobile parts, serving numerous parts processing factories and professional parts manufacturers.

WX-600 / 800 / 1000 / 1500 / 2000 / 2500 models are all fine-wash type washers. The machine is internally equipped with a complex multi-level micron filter system to meet the high-precision wash requirement of modern industry.The machine features high pressure and many nozzles, and products after washing are basically impurity and grease-free, realizing the washing quality and function expected by the modern manufacturing industry.

Cleaning effect diagram