WX-800DG Intelligent Parts Washer

Product Description

① High efficiency: Applying automation control with the PLC, the machine allows one man operation. With the cyclic process of loading - high-pressure washing - rinsing - air-drying - unloading, the machine has a capacity 6-7 times higher than conventional manual washing. Since the pressure during high-pressure washing reaches 0.7MPA, the cleanliness of parts after washing is greatly improved.

② Multiple functions: The housing of the machine is made of stainless steel which allows use of over 95% of washing agents sold on the market. The high-pressure wash nozzles allow omnidirectional washing; the rinsing part is installed with a featured nozzle so that the machine can meet the parts washing requirements of various industries and complete washing without dead corners.

③ Low energy consumption: The machine is equipped with a “water-oil filtration circulation system” so that the filtered wash liquid is transparent and contains no impurity or floatage. This can ensure that the liquid used for washing is always clean, and user only need to add liquid into the machine without changing all the liquid in the tank.

④ Environment-friendly type: The machine is equipped with a "water-oil-gas recovery system" so that the purity of air produced during work of the machine can reach above 95%, meeting the national requirements for environmental protection; the recovered liquid drops can also be reused in the wash tank, thus saving energy and guaranteeing operators’ physical and mental health.

⑤ Water-liquid separation system: This function can transfer the floating oil on the water surface to a small separate box and keep the liquid clean.

Washing Process

Loading ⇨ Pneumatic Door Closing ⇨ High-pressure Washing ⇨ Rinsing ⇨ Air-drying ⇨ Pneumatic Door Opening ⇨ Unloading ⇨ Fully Automatic Completion

Principle of High-pressure Washing

The high-pressure wash pump produces high-pressure water, and the high-pressure wash nozzles in six directions (up, down, left, right, front and rear) eject high-pressure water columns to flush parts on the rotary table (suitable for small parts with uneven surface, blind hole or high requirement on cleanliness) to strip and wash away dirt. The last step is rotary air-drying (drying) to achieve the effect of clean surface.

Waste water is separated and purified through "Water-oil filtration" -"Water-oil-gas recovery" -"Water-oil separation" -"1-100μm impurity filter mesh". Wash liquid is always kept clean and can be recovered and reused to reduce the frequency of water change. User only need to timely add wash liquid when the amount of wash liquid is insufficient.

The machine employs an enclosed modular cabinet design (stainless steel), internal heating of wash liquid, and PLC LCD control, realizing high efficiency, energy conservation, environmental protection, and wide scope of application.

Technical Parameters

Model: WX-800DG

Power supply: AC 380V 50HZ (Three-phase four-wire system)

Dimensions (L*W*H): 1460 *1060 *1990mm

Size of part table: Φ500*380mm

Total power: 20KW

Power consumption: 8KW/h

Control mode: PLC LCD

Remark: The dimensions of the washer can be set according to the requirements for parts washing (1M cube - 3M cube)

Application Areas

We supply metal or plastic products to such industries as motorcycle parts, motors & pumps, general-purpose engines, sewing machines, and automobile parts, serving numerous parts processing factories and professional parts manufacturers.

WX-600 / 800 / 1000 / 1500 / 2000 / 2500 models are all fine-wash type washers. The machine is internally equipped with a complex multi-level micron filter system to meet the high-precision wash requirement of modern industry.The machine features high pressure and many nozzles, and products after washing are basically impurity and grease-free, realizing the washing quality and function expected by the modern manufacturing industry.

Cleaning effect diagram